Illustrative swatch
Sample range
Dining room vinyl
Sample fitted estimates: a typical rectangular room, with underlay where needed, grippers and a door bar. Subfloor preparation is extra and checked at the measure. Removal of the old floor is not offered in this preview.
Not sure which range is right for the room?
Book a free measureA dining room sits between a living room and a kitchen in how hard it gets used: chair legs scrape, glasses get knocked over, and a big table leg can dig into a soft pile if the feet are not protected. Hard-wearing carpets, laminate and engineered wood all work well here, provided chair-leg protectors do the rest of the job.
If the dining space opens straight off a kitchen, it is worth thinking about the floor as one continuous choice rather than two, so there is no trim strip running through a room you can see the whole of from the sofa.
Vinyl questions
Is sheet vinyl waterproof?
The surface is fully waterproof, which is why it is the usual choice for kitchens and bathrooms. Water can still find its way through a join if one is not sealed properly, which is why a bathroom is often fitted with no seam at all where the room size allows it.
Why does vinyl also come off a roll?
Like carpet, sheet vinyl is manufactured and sold in a fixed roll width, so the same roll-width maths applies: you pay for the ordered area, not just the floor area, and our estimator shows both.
Can vinyl go over old tiles?
Often yes, provided the old surface is flat, sound and free of movement. That is confirmed at the home measure, because laying over an unsuitable surface is exactly the kind of problem a subfloor check is there to catch.
Does vinyl need underlay?
Sometimes a thin underlay is used to smooth small imperfections in the subfloor, but it is a different product from carpet underlay and is confirmed at the measure rather than added automatically.
How do I clean it day to day?
A regular sweep or vacuum and an occasional mop with a manufacturer-approved cleaner is normally enough. Avoid steam cleaners on vinyl, since the heat can lift the seams over time.