Illustrative swatch
Sample range
Illustrative swatch
Sample range
Parkland Oak
Engineered Wood · Chalk Oak
from £42 per m² (sample price)
1.4m² packs
- uv resistant
- sustainable
- hard wearing
Sample fitted estimates: a typical rectangular room, with underlay where needed, grippers and a door bar. Subfloor preparation is extra and checked at the measure. Removal of the old floor is not offered in this preview.
What would this cost in your room?
Specification
| Material | 15mm brushed and oiled engineered oak |
|---|---|
| Wear layer | 4mm |
| Pack size | 1.4 m² per pack |
| Suitable for wet areas | No |
About this range
A real wood surface, built to cope with a warm home. Compare the illustrative colours and use your room dimensions to see how roll width or pack size changes the quantity needed.
These are sample specifications and prices. Final materials and the written price are confirmed at the measure.
Suits
Questions about engineered wood
What makes it "engineered" rather than solid wood?
Engineered wood has a real timber top layer bonded onto layers of plywood or board underneath. That construction copes far better with the temperature and humidity changes of a normal home than solid wood, while keeping a genuine wood surface you can see and feel.
Why is engineered wood sold by the pack?
Like LVT and laminate, engineered wood boards are boxed into fixed-size packs, so the pack-area rule rounds your floor area up to the next whole pack rather than pricing a continuous roll.
Can it be sanded and refinished later?
Most engineered boards can be lightly sanded and refinished once or twice over their life, depending on how thick the real-wood top layer is. That figure is shown in the specification table for each range.
Is it suitable for a kitchen?
It copes with normal kitchen life but is not fully waterproof, so standing water and heavy splashing are best avoided. For a wet-prone kitchen, LVT is usually the safer choice.